  
|
|
 Style 1123
A non-asbestos general purpose sheet packing composed of synthetic fibers held together with a SBR rubber binder.
Applications Recommended for gasket and other static applications. Also recommended for gases, water, inorganic salt solutions, brake fluid, and alcohol applications.
Max Temp 450oF Max Press 400 psi
Tensile Strength 1600 psi pH Range 3 – 12
 Style 1125
General purpose sheet, green in color, composed of chemical and heat resistant synthetic fibers held together with a nitrile rubber binder.
Applications Recommended for gasket and other static applications. Excellent anti-stick properties and resistance to wet stem. Suitable for ammonia, acetic acid, gases, water, fuels, benzene, mild acids, Freon 12 & 22, ethylene glycol, hydrocarbons, oils and greases, sea water, alcohols, vinyl acetate, xylene, and heat transfer oil applications.
Max Temp 750oF Max Press 1400 psi
Tensile Strength 2200 psi pH Range 3 – 12
 Style 1128
Top quality close mesh, mild steel wire-reinforced non-asbestos material for severe conditions. Utilizes a nitrile rubber binder and is graphited on one side to produce a black colored sheet. Also resilient to fluctuating temperature and pressure.
Applications Recommended for gasket and other static applications. Recommended for ammonia, gases, water, steam, inorganic salt solutions, mild acids, alkalies, hydrocarbons, oils and greases, alcohol's, ethers, and heat transfer oil applications.
Max Temp 750oF Max Press 1400 psi
Tensile Strength 3000 psi pH Range 3 – 12
 Style 1137
Composed of carbon fibers which are held together by a nitrile rubber binder. Black in color and good for steam service.
Applications Recommended for gasket and other static applications, especially for steam service. Recommended for ammonia, gases, water, steam, inorganic salt solutions, mild acids, alkalies, hydrocarbons, oils and greases, sea water, alcohol's, ethers, and heat transfer oil applications.
Max Temp 850oF Max Press 2000 psi
Tensile Strength 1500 psi pH Range 3 – 12
|
