  
|
|
 Style 1110
Sheet which is red in color with a cloth impression finish and a 65-85 durometer commercial grade of SBR rubber.
Applications Recommended for use in general sealing or gasket applications. Suitable for water, air, mild acids, and other light duty services.
Max Temp -10oF to 250oF Max Press 100 psi
Tensile Strength 500 psi pH Range 4 – 10
 Style 1112
A 60 durometer chloroprene rubber blend that has a smooth finish and black color.
Applications Recommended for use as pads, bumpers, and general sealing or gasket applications and is suitable for general services including ethylene glycol, water, air, alcohols, and salt water. Excellent as a weather stripping material. Not suitable for severe oil and ozone applications.
Max Temp -20oF to 250oF Max Press 150 psi
Tensile Strength 1000 psi pH Range 4 – 10
 Style 1113
A 65 durometer nominal commercial grade of homogeneous nitrile (Buna-N) rubber that is black in color with a plate finish.
Applications Recommended for use as pads, bumpers, and general sealing or gasket applications. Suitable for general services including petroleum oils and solvents, hydraulic fluids, alcohols, gasoline, water, air, and other hydrocarbon services.
Max Temp -30oF to 250oF Max Press 250 psi
Tensile Strength 1750 psi pH Range 4 – 10
 Style 1120
Medium density closed cell cloroprene sponge material.
Applications Recommended for weather and door stripping, protector seals for API flanges, padding to reduce vibration, and other static gasket applications. Suitable for ozone applications, water, weather resistance, and other general light duty services.
Max Temp -70oF to 150oF Max Press 100 psi
Tensile Strength 55 psi pH Range 4 – 10
 Style 1121
A 40 durometer commercial grade of Natural rubber that is tan in color with a smooth finish and highly elastic with excellent abrasion resistance. Meets FDA guidelines 21 CFR177.2600.
Applications Recommended for use as pads, bumpers, and general service sealing or gasket applications, especially where irregular surfaces are present. Suitable for general services including inorganic salts, cold ammonia gas, some acids, air, water, alkalies, and other general services. Not suitable for oil and grease services. Suited for food contact and potable water services.
Max Temp -20oF to 140oF Max Press 100 psi
Tensile Strength 3000 psi pH Range 4 – 10
 Style 1122
A blend of nitrile rubber and polyvinyl chloride plastic and is white in color. Meets FDA guidelines CFR 177.2600 for rubber articles intended for repeated food use and is suitable for portable water requirements.
Applications Recommended for gasket and other static applications and is suitable for oils, hydrocarbons, weather resistance, and food services.
Max Temp -30oF to 225oF Max Press 250 psi
Tensile Strength 1000 psi pH Range 5 – 10
 Style 1150
High temperature fluorocarbon elastomer. Has smooth finish and is black in color.
Applications Recommended for gasket and other static applications. Excellent high temperature properties and resistance to aromatic hydrocarbons. Suitable for most acids, sour gas, oils, alcohols, alkalies, polar and chlorinated solvents, and hydrocarbons. Not suitable for service in low molecular weight esters, ketones, Freon refrigerant, hot anhydrous hydrofluoric or chlorosulphonic acids, certain amines, and alkyl phosphate esters.
Max Temp -10oF to 400oF Max Press 250 psi
Tensile Strength 1000 psi pH Range 3 – 10
 Style 1152
Moderate service sheet composed of EPDM rubber with a smooth finish and black in color.
Applications Recommended for gasket and other static applications. Has excellent electrical and dynamic properties and resistance to steam. Suitable for anhydrous ammonia, steam, water, most inorganic chemicals, and other general services. Very resistant to weathering conditions.
Max Temp -20oF to 250oF Max Press 150 psi
Tensile Strength 800 psi pH Range 6 – 10
 Style 1155
Economical grade of silicone rubber. Has a smooth finish and is red in color.
Applications Recommended for use as pads, bumpers, weather stripping, and gasket and sealing applications. Suitable for hot oil, salt water, air, sunlight, ozone, and other general services. Has excellent weathering qualities. Not suitable for steam, ketones or hydrocarbons.
Max Temp -65oF to 450oF Max Press 250 psi
Tensile Strength 800 psi pH Range 7 – 12
Style 1160
Calendered or molded from a 74 durometer high temperature AFLAS fluoroelastomer compound. Based on a copolymer of tetrafluorethylene and propylene.
Applications Recommended for gasket and other static applications. Has excellent temperature properties and resistance to steam. Suitable for most acids, bases, high pH corrosion inhibitors, sour gas, oils, steam, alcohols, alkalies, polar solvents, and hydrocarbons. Has fair resistance to aromatic solvents, fuels, ketones, and low molecular weight esters and ethers. Not suitable for service in chlorinated solvents, Freon refrigerant, and tetrahydrofurane.
Max Temp 32oF to 450oF Max Press 275 psi
Tensile Strength 2000 psi pH Range 3 – 10
Style 1161
Reinforced sheet comprises molded sheet made from a 74 durometer high temperature AFLAS fluoroelastomer compound with a nylon cloth insert. AFLAS based on a copolymer of tatrafluorethylene and propylene.
Applications Recommended for gasket and other static applications. Has excellent temperature properties and resistance to steam. Suitable for most acids, bases, high pH corrosion inhibitors, sour gas, oils, steam, alcohols, alkalies, polar solvents, and hydrocarbons. Has fair resistance to aromatic solvents, fuels, ketones, and low molecular weight esters and ethers. Not suitable for service in chlorinated solvents, Freon refrigerant, and tetrahydrofurane.
Max Temp 32oF to 350oF Max Press 400 psi
Tensile Strength 2880 psi
 Style 1164
65 durometer shore "A" homogeneous polyester polyurethane material that is abrasion resistant and more durable than rubber sheet materials. Has excellent load bearing capabilities.
Applications Recommended for use as pads, wear resistant lining, bumpers, and general sealing or gasket applications. Suitable for general services including water, petroleum oils, air, and abrasive slurries.
Max Temp -50oF to 180oF Max Press 450 psi
Tensile Strength 5320 psi pH Range 5 – 10
 Style 1165
A 95 durometer shore "A" homogeneous polyurethane material that is abrasion resistant and more durable than rubber sheet materials. Has excellent load bearing capabilities.
Applications Recommended for use as pads, wear resistant lining, bumpers, and general sealing or gasket applications. Suitable for general services including water, petroleum oils, air, and abrasive slurries.
Max Temp -50oF to 180oF Max Press 550 psi
Tensile Strength 7000 psi pH Range 5 – 10
 Style 1166
Rigid 70 durometer (Shore "D") homogeneous polyurethane material that is abrasion resistant and more durable than rubber sheet materials. Has excellent load bearing capabilities.
Applications Recommended for use as pads, wear resistant lining, bumpers, and general sealing or gasket applications. Suitable for general services including water, petroleum oils, air, and abrasive slurries.
Max Temp -50oF to 180oF Max Press 750 psi
Tensile Strength 6000 psi pH Range 5 – 10
|
