• Providing products that have a guaranteed life and guaranteed performance.

• Providing a product that will improve your productivity.

• Providing products that lower maintenance expenses.

• Providing products that address environmental concerns.

• Provide products and technical services that meet our customers demands.

ANSI/PS Front Installed No Flush Mechanical Seal

Waterless seals for: Waukesha Pumps

Waterless seals for: Tri-Clover Pumps

Portable Jack Bolt System - fast, accurate, economical system for alignment of rotating equipment.

Precut Stainless Steel Shims

Alignment Undercut Bolts

Equiprotector is an electronic device for preventing equipment damage.

INTRODUCING
A Truly New Concept In Cartridge Mechanical Seals
This patent pending cartridge seal is not a modification or a duplicate of any seal on the market.
The seal design is simple in concept and simple to manufacture. The result is a inexpensive seal with repair costs that are minimal as well. 
This seal is installed through the front of the back plate. Unlike all other seals that bolt to the back of the stuffing box, this seal eliminates the stuffing box entirely. The benefits of the stuffing box redesign is a simpler installation and more clearances for better lubrication and cooling.

Available for Goulds & Durco ANSI Pumps and
Goulds Paper Stock Pumps.
Both single and double seals available.

Installed through the front of the back plate - simpler installation
Simple design, simple to manufacture, inexpensive to buy and repair.
No flush required, more clearances for better lubrication and cooling.

Self-Cleaning Taper                                
Eliminates any flush requirements                  
Eliminates most premature failures 

More room for seal components   
Better lubrication & cooling                    
Longer seal life than any competition

Seal Faces 
Standard - c/sc            
Available - sc/sc

Front Installed Cartridge Seal
  Eliminates stuffing box removal
  Quicker installation and faster turnaround

Metallurgy
Standard - 316L SS
Available - Alloy 20, Hastalloy, Titanium

Available Shaft Sizes:
Goulds - 1-3/8", 1-3/4", 2-1/8", 3", 3-3/4", 4-3/4"
Durco - 1-1/8", 1-3/8", 1-7/8", 2-5/8"

ANSI/PS Seal Backplates (required)
Goulds 3196ST - 6", 8"                Goulds 3196MT -8", 10", 13"   
Goulds 3196LT - 10", 13"           Goulds 3196XLT - 13", 15"
Goulds 3175S - 12", 14", 18"      Goulds 3175M - 14", 18", 22"
Goulds 3175L - 18", 22"

Durco - Group I - 6", 8"                Durco - Group II - 7", 8", 10", 13"
Durco - Group III - 14", 16", 17"

Repair Options
ANSI/PS Seal Exchange Kit - Used rotary and stationary seal parts are returned for an inexpensive repair kit. This kit includes: reconditioned Silicon-Carbide components, new Carbon components, and all parts necessary to complete rebuild your ZMT ANSI/PS Seal.
ANSI/PS Seal Repair Kit - This seal kit includes all new seal components. A complete seal repair kit includes: new Silicon-Carbide components, new Carbon components, and all parts necessary to completely rebuild your ZMT ANSI/PS seal.

Performance Limits:
Temperature - up to 400^oF
Pressure - Full vacuum to 300 psig (25 bars)
Speed/Velocity - up to 6,500 fpm (33 mps)

Waterless Seals for Waukesha Pumps

Available sizes 
030, 060, 125, 130, 220, 320
Do you use a double seal?
Do you use flush water for your seal?
Do you throw away your seals after removal?
Looking for a seal with 4 - 6 times seal life?

Compare ZM Technologies to Waukesha
Compare maintenance and operating costs of a ZMT Seal vs. the O.E.M.

Details on repair:
Return worn seal to ZM Technologies for complete reconditioning.
1) Exchange repair: Reconditioned Silicon-Carbide rotary and stationary, or new Carbon stationary, O-rings, wave spring.

Waterless Seals for Tri-Clover Pumps
Available Pump Sizes:
216, 218, 328, 4410, 2BEH. 3EH. 4EH

Pre-assembled and ready for installation
Some back plate modifications are needed
Inexpensive seal exchange kit, or
field seal repair kit

The Better Way
Modified back plate will never need repair again.
Choice of seal face combinations, carbon or silicon-carbide.
Cartridge seal eliminates installation guess work.
Modern Design repairs quickly, easily and inexpensively.
To Reduce Spending
Back plate and shaft repair are totally eliminated.
Less down time means more production time.
Exchange seal repair kit makes seal repair painless - easier and less expensive than repairing the manufacturer's seals.
Easy seal installation and pump overhaul uses less mechanic time.
To Reduce Maintenance
Better seal face materials and a better seal design provides seal life that averages 3 - 5 times longer than manufacturer's seal.
Zero Maintenance design eliminates back plate wear, reducing time to repair pump.
Field repairable - thus minimizing downtime.
Seal is quickly, easily and inexpensively repaired with a repair kit.

Positive Displacement Pumps
Waukesha - TriClover - Fristam - APV Crepaco - Others
Centrifugal Pumps
Tri-Clover - Fristam - Waukesha - APV Crepaco - Others
Heat Exchangers
Cherry-Burrell - Votater - Contherm - Fran-Rica

Compare ZM Technologies to Tri-Clover
Compare Maintenance and Operating costs of a ZMT seal vs. the O.E.M.

*except DG type seals

Details on repair:
1) Exchange repair kit: Reconditioned Silicon-Carbide rotary, new Carbon stationary, O-rings, wave springs, clips, and screws.
2) Repair Kit: New rotary, stationary, O-rings, wave springs, clips and screws.
3) Return worn seal to ZMT for complete reconditioning.

Alignment Undercut Bolts
High Strength Bolt machined down to provide maximum clearance.

Individual Undercut Alignment Bolts available in sizes from:
5/16" dia. x 1-1/4" long x 3/4" shank length
to
1-1/4" dia. x 4-1/2" long x 2-3/4" shank length

Call us about other sizes, 715-675-2344.

The Equiprotector is a solid state electronic device for protecting equipment from overload and underload conditions. Overload is typically an indication that something is causing undue load on the motor and if left undetected will cause equipment damage. The solid state overload protection feature is more reliable for motor protection than motor starter heaters. Underload, low amperage, is typically an indication that something is wrong, or that the equipment is running dry, empty, broken, or without product and if undetected can be damaged. This equipment damage can be prevented with the underload protection feature.

Model - CS10A
Stop mechanical seal damage from pumps running dry. Stop damage to conveyors, pulpers, finishers or any other equipment that can be damaged by operating empty or broken.
Save money by not destroying your mechanical seals. Save time by eliminating unnecessary repair to damaged equipment. Increase productivity by reducing equipment downtime.

Model - CS100D
Stop motor damage and false trips caused by unreliable motor starter heaters. Stop equipment damage by operating equipment empty, dry, broken or from an overload condition.
Save money by combining all the features of the CS10A, plus solid state overload protection. Save by having both overload and underload protection in one convenient unit.

Applications: Motor overload, pumps with mechanical seals, magnetic drive pumps, progressive cavity pumps, conveyors, fans, automated packaging equipment, finishers.

(*)Overload configuration optional    (**) 230 VAC operation optional

All Equiprotector models are user friendly, easy to install, set-up, and operate. Equipment modifications are usually not necessary. AC current sensing is accomplished by simply routing one motor lead through the window of a sense transformer. Connections to existing electrical terminals are not necessary, nor is it necessary to modify or change existing wire routing. Since all functions are electrical, a physical pipe or plumbing change is not needed either. The relay connections are then used to set off an alarm, or shut-off the equipment or both. All models are sized to fit in average sized enclosures. The CS100D and the K1000A models are available in NEMA-4X corrosion resistant enclosure.